| 品牌 | 其他品牌 | 電動機功率 | 0.06-0.24kW |
|---|---|---|---|
| 外形尺寸 | 72mm*72mmmm | 重量 | 3kg |
| 應用領域 | 環保,生物產業,電子,電氣,綜合 | 速度范圍 | 0-1500RPM |
| 分辨率 | 1RPM | 電機類型 | 矢量FOC直流無刷電機 |
| 電機功率 | 驅動電流2.5A/5A/10A | 供電電源 | 直流24V |
| 程序段 | 99段編程 | 定時時間 | 0-99H59Min |
| 面板尺寸 | 72mm*72mm | 開孔尺寸 | 68mm*68mm |
| 電源板尺寸 | 110mm*170mm?(10A)?&?100mm*100mm(2.5A?&5A) | 恒溫范圍 | 0-100°C/-90℃-400℃ |
| 傳感器類型 | 熱敏電阻/PT100 | 負載功率 | 制冷（風機）0-2000W?25A繼電器，?加熱0-2000W可控硅,?25A繼電器保護 |
| 定時范圍 | 0-99H59Min | 控溫精度 | 0.1°C |
| 輸出方式 | AC220V/24A可控硅 |
適用范圍 Application
LANKAI 恒溫矢量FOC直流無刷電機搖床控制器廣泛適用于各式振蕩器，搖床搖瓶，電動攪拌器，磁力攪拌器，反應釜等高精度恒溫恒速設備。
Application: water/gas bath oscillator, incubator shakers, thermostatic shakers, magnetic stirers,centrifugal machines ect.
產品特點 Features
LANKAI 恒溫矢量FOC直流無刷電機搖床控制器LKSC-C-T系列智能恒溫恒速控制儀表是高性能、高精度的溫速一體控制模塊，其性能如下：
①電機系統： 采用最新FOC正弦波矢量控制技術和模糊PI控制技術，運行平穩，緩啟緩停，大力矩，輕噪音，發熱低，可長時間穩定運行，帶過流過速堵轉保護電機等功能。也可適配其他直流無刷電機或者伺服電機。
②恒速，恒扭矩模式可一鍵切換。可組合恒濕、風機、門鎖等功能。
③溫控系統： 采用多年自研模糊PID控溫，超調小,穩定快，過沖低。自適應PID， 一鍵自整定，超溫（范圍可設置）、傳感器脫落報警。
④ 可設置99段程序，多種液晶顯示、觸摸屏尺寸規格可選。
⑤擴展：支持 232接口和標準485ModBus-RTU協議，可接電腦上位機軟件控制，PLC等，支持MODBUS協議標準外設。
①Adopting the latest FOC vector and fuzzy PI control technology, the operation is more smoothly, slow start&stop, high torque, light noise, low heat generation, and can run stably for a long time. It also has functions of overcurrent speed blocking protection for the motor, can adapt to other brushless motors that support FOC.
②Can set to operate by constant speed or constant torque mode.
③Intelligent PID fuzzy temp.control with adaptive PID self-tuning to get higher temp. efficiency , accurate and smaller temp. drift.
④Over temp. sensor detachment alarm protection, can expand function for door lock or fan ect.
⑤Support 232 interface and RS485 ModBus RTU protocol, allowing one host to control multiple sets of motor kits, can connect to upper computer software to control the reading of real-time and historical data, view operating curves, and support MODBUS protocol standard peripherals.
技術參數 Technical Parameter
測量范圍 Temperature measurement range | 0-100°C/-90°C~400°C | ||||||
分 辨 率 Display resolution | 0.1°C | ||||||
輸入方式 Input mode | NTC熱敏電阻/pt100 NTC thermal resistor/pt100 | ||||||
輸出方式 Output mode | 220V/24A可控硅輸出 220V/24A Silicon Controlled rectifier (scr) output | ||||||
負載功率 Load power | 制冷（風機）0-2000W，加熱0-2000W可控硅, 可選25A繼電器保護 Refrigeration (fan) 0-2000W 25A relay, Heating 0-2000W thyristor, 25A relay protection | ||||||
速度范圍 Measurement range | 0-1500RPM | ||||||
測量誤差 Inaccuracy of measurement | ±1%FS ±1% Revolution/minute | ||||||
分 辨 率 Display resolution | 1 RPM | ||||||
電機類型 Motor Type | FOC矢量直流無刷電機,或其他無刷電機 FOC vector control brushless DC motor，or brushless DC motr | ||||||
電機功率 Motor power | 驅動電流 2.5A/5A/10A Drive current 2.5A/5A/10A | ||||||
供電電源 Supply voltage | 直流24V DC24V | ||||||
程序段 Program segment | 99段編程 99program segments | ||||||
定時范圍 Timer range | 0-99H59Min | ||||||
工作環境 Working condition | -5℃—50℃，相對濕度35%—85% Environment temperature:-5℃—50℃, Relative humidity：35%—85% | ||||||
外觀尺寸 Exterior size | 72mm*72mm/92mm*150mm/7、5、4.3 inch touchscreen | ||||||
開孔尺寸 Hole size | 68mm*68mm，86mm*144mm | ||||||
電源板尺寸 Power Panel size | 110mm*170mm (10A) & 100mm*100mm(2.5A &5A) | ||||||
